Chapters
- Contents1
- Description and Specifications3
- Chapter 1 - Engine8
- Data8
- Accessory removal9
- Engine disassembly10
- Crankshaft and flywheel14
- Cylinder block16
- Pistons and connecting rods21
- Camshaft and valve mechanism26
- Cylinder head and front cover30
- Oil pump30
- Water pump32
- Governor34
- Oil pan, intake and exhaust manifolds38
- Assembly of engine40
- Installation of accessories46
- Definition of fits48
- Fits and tolerances50
- Torque wrench readings51
- Carburetor52
- Servicing the starter58
- Chapter 2 - Transmission61
- Chapter 3 - Power Take-Off71
- Chapter 4 - Belt Pulley75
- Chapter 5 - Rear Axle79
- Chapter 6 - Hydraulic System89
- Chapter 7 - Steering Gear101
- Chapter 8 - Service Bulletins111
- Bulletin Attachments126
Chapter 1 - Engine
Data page 8
Chapter1DESCRIPTION AND DISASSEMBLYSectionDatalllAccessory Removal112Engine Disassembly113The Ford 4-cylinder engine (figs. 1 and 2) is of the L-head type,having all cylinders and the upper half of the crankcase cast in onepiece. Steel cylinder sleeves are used, which are easily replaced whenrebuilding the engine. The distributor is driven directly from thefront end of the camshaft.111. DATATypeL-headTaxable horsepower16.2Number of cylinders4Bore3.187 in.Piston displacement119.5 cu. in.Torque85 lbs. ft. at 1200 RPMFiring order1-2-4-3§ 111.3695-478FANWATER PUMPFAN BELTOILFILLER PIPESUPPORTCYLINDER FRONT COVERFig. 1—Left 3A Front View of EngineOIL FILTER RETURN LINEOIL LEVEL GAUGERM-501WATER DRAIN COCKOIL PANSTARTINGMOTORCYLINDERBLOCKOIL FILTERINLET LINECYLINDER HEADWIRE CONDUITSPARK PLUGOIL FILTEROIL FILLER CAPFree to read online. Contents · Where is the serial number on a 9N, 2N or 8N?
