Chapters
Chapter 2 - Transmission
Disassembly page 61
Chapter2TRANSMISSIONSectionDisassembly131Inspection and Repair132Assembly133The Model 8N Ford tractor is equipped with a four-forward speed,constant-mesh transmission.131. DISASSEMBLY.The transmission comprises seven principle subassemblies. Theseshould be removed as follows.a. Remove Subassemblies. Remove the cover assembly.Remove the top shift rail and plates by loosening the nut on theshift fork and turning out the screw until the shaft is free to slide onthe fork. Slide the shift rail out of the rear of the housing. The inter-lock spring and ball will fall from the top of the housing as the railis removed. Remove the large shift pivot screws from each outsideface of the housing, and remove the shift plates.Disconnect the clutch release bearing retaining springs, andremove the bearing.§ 131. a.3730-47J61SHIFT LEVERTRANSMISSION COVERFILLER CAPMAIN SHAFTBEARING RETAINERMAIN SHAFTPOWER TAKE-OFFDRIVEINTERLOCK BALL PLUGFig.9—TransmissionSHIFT PLATE CAP SCREWBRAKE PEDALRM-607Free to read online. Contents · Where is the serial number on a 9N, 2N or 8N?
