Chapters
- Contents1
- Description and Specifications3
- Chapter 1 - Engine8
- Chapter 2 - Transmission61
- Chapter 3 - Power Take-Off71
- Chapter 4 - Belt Pulley75
- Chapter 5 - Rear Axle79
- Chapter 6 - Hydraulic System89
- Chapter 7 - Steering Gear101
- Chapter 8 - Service Bulletins111
- Bulletin Attachments126
- #1 Installing the new valve127
- #2 Adjustable tappet instructions129
- #3 Head bolt torque and tightening sequence130
- #4 8N engine ring overhaul, general specifications131
- #5 Servicing cast iron sleeves134
- #6 Oversize piston and ring sets135
- #7 Installing and timing the angle drive distributor137
- #8 Installing the 8N-10000-B generator140
- #9 Identifying and servicing carburetors142
Bulletin Attachments
#8 Installing the 8N-10000-B generator page 140
ATTACHMENT #8Page 1 of 2INSTALLATION INSTRUCTIONS8N-10000-B Generator and2N-10042 Kit on 2N and 9NTractors.Following is the procedure for installing the Generator8N-10000-B and the Conversion Kit 2N-10042 on 2N and 9NModel tractors.1. DISASSEMBLY:A. Remove the 8N-10000-A Generator assembly, the Generatorbelt adjusting clamp 2N-10181 (when used) and the Generatorcutout 9N-10505-B.B. Tape or cut both ends of cutout to generator armature wire(yellow with black tracer) which was disconnected from cutout(bottom terminal) and generator,2. INSTALLATION:A. Install the 8N-10000-B Generator and the 2N-10181-B Generatorbelt adjusting clamp (where used)B. Install (where 9N-10505-B cutout was removed) the 2N-10599Mounting Bracket and 8N-10505-B Voltage Regulator Assembly.C. Attach the 2N-14305 wiring assembly to the 9N-12112 conduitwith the four (4) 91A-10882 clips.D. Connect the yellow lead from the original wiring assembly9N-14401-C (was connected to top terminal of cutout) to thebattery terminal on voltage regulator.E. Connect the leads as follows:1. Generator field to voltage regulator field (black withwhite tracer).2. Generator ground to voltage regulator ground (black withred tracer).3. Generator armature to voltage regulator armature (yellowwith black tracer).140Free to read online. Contents · Where is the serial number on a 9N, 2N or 8N?
