Chapters
Chapter 6 - Hydraulic System
Hydraulic system adjustments page 97
Fig. 28—Control Spring Adjustmentmaking sure that the shoulder on the power take-off bushing is seatedin the recess in the forward end of the cam. Install the valve chambersand new gaskets on the pump base. When installing the valve cham-bers, be sure that the oil holes in the valve chamber are in line withthe oil passages in the pump base. There are right and left hand valvechambers and it is possible to interchange them. The pipe plugsshould be on the same end of the pump as the control valves (fig.22).143. HYDRAULIC SYSTEM ADJUSTMENTS.The hydraulic pump is of precision manufacture and does notrequire adjustment. The hydraulic unit, however, is composed ofseveral subassemblies and must be carefully adjusted as outlinedbelow.a. External Adjustments. There are two external adjustmentsof the hydraulic unit. They may be made with the hydraulic uniteither on or off the tractor.(1) ADJUSTMENT OF CONTROL SPRING. Place the hy-draulic touch control lever at the top of the quadrant, then turn theouter control spring seat until there is no end play in the spring.The preload on the control spring should be such that it is possibleto turn the spring with a thumb and two finger grip as shown in fig.28.3730-47J§ 143. a. (1)97CONTROL SPRINGCONTROL SPRING OUTER SEATOM-414Free to read online. Contents · Where is the serial number on a 9N, 2N or 8N?
