Chapters
Chapter 6 - Hydraulic System
Hydraulic unit page 91
(2) BUSHINGS. Replace the lifting arm shaft bushings if theyare scored, pitted, or if the inside diameter is excessively worn.(3) LIFTING ARM SHAFT. Replace the lifting arm shaft if itis damaged or if the bearing surface is excessively worn.(4) LINKAGE. Replace any linkage that is twisted, bent, ordamaged in any way.(5) RAM CYLINDER AND PISTON. Replace the ram cylinder(fig. 20) if it is scored or if the bore is excessively worn. Replace thepiston rings when the cylinder is disassembled. Replace the piston ifit is scored or cracked.3730-47JFig. 20—Ram Cylinder, Disassembled§ 141. b. (5)91Fig. 19—Hydraulic Cover and Lift Arms, DisassembledPISTON—530 PISTON RINGS—533RM-627RAM CYLINDER—510RAM ARM—545COVER-501CAP SCREWS-20874-S7LOCKWASHER—550WASHER—551SHAFT—544BUSHING—531LIFTING ARM—543BUSHING—531LIFTING ARM—543RM-623CAP SCREWS—20874-S7LOCKWASHER—550WASHER-551Free to read online. Contents · Where is the serial number on a 9N, 2N or 8N?
