Chapters
Chapter 6 - Hydraulic System
Hydraulic pump page 94
Fig. 23—Removing Valve Guide Seatsclamp from each valve chamber cover. Remove the two spring seats,outlet valve springs, outlet valves, inlet valve springs, inlet valves,valve guides, and valve guide seats from each valve chamber (fig. 27).Remove the two valve guide seats from each valve chamber coverwith a pencil as shown in fig. 23.b. Inspection and Repair. Clean all parts thoroughly in a clean-ing solvent and blow dry with compressed air. Scrape gasket surfacesuntil all pieces of old gasket are removed.(1) SAFETY VALVE. Replace the safety valve (fig. 24) if thecheck valve surface is ridged, if the ball is worn or damaged, or if thesafety valve spring has taken a permanent set as shown by inabilityto hold the required pressure.Fig. 24—Safety Valve and Valve Chamber§ 142. b. (1)3730-47J94VALVE CHAMBER—622-R.H.621-L. H.GASKET—613RM-600INTAKE CONTROLVALVE—694LEVER—643EXHAUST CONTROLVALVE—640SAFETYVALVE—638SOCKET VALVE GUIDE—627PencilRM-597Free to read online. Contents · Where is the serial number on a 9N, 2N or 8N?
