Chapters
Chapter 5 - Rear Axle
Disassembly page 80
Fig. 33—Removing Hub From AxlePlace the differential assembly on a bench, and remove the lockwire and eight case bolts that secure the differential gear case to thedrive gear assembly. Separate the two halves. If necessary, use abrass hammer to tap the two halves apart. Remove the differentialspider, together with the differential pinions and thrust washers,from the differential gear case (fig. 35). Remove the differential sidegears and thrust washers.Fig. 34—Backing Plate and Hub, Disassembled§ 151.3730-47J80HUBPullerRM-649AXLEAXLE HOUSING—4010 R.H.4011 L.H.BEARING—4221 BACKING PLATE—2224SEAL-4251BEARING CUP4222BRAKE SUPPORTPLATE—2255HUB—1117RM-617RETAINER—4187NUT—4179FLATWASHER—4293SEAL—4294SEAL RETAINERGASKET—4130BEARING RETAINER—4124SHIMS—4229GASKET—4130AXLE SHAFT-4235Free to read online. Contents · Where is the serial number on a 9N, 2N or 8N?
