Chapters
Chapter 2 - Transmission
Disassembly page 64
Fig. 13—Reverse Idler Gear, Disassembled(1) MAIN SHAFT ASSEMBLY. Remove the bearing from theforward end of the main shaft (fig. 11). To remove the rear main shaftbearing, install a bearing puller on the 60T gear, and remove the gear,thrust washer, and bearing. Remove the rest of the gears from theshaft. Remove the forward roller bearing and the 20T main drivegear with a bearing puller.(2) COUNTERSHAFT ASSEMBLY. Remove the rear rollerbearing (fig. 12) with a bearing puller. Press the countershaft gear3730-4 7 JFig. 14—Power Take-off Shift Assembly, Disassembled§ 131. b. (2)64SNAP RING-7070COUPLING-7145THRUST WASHER—7148GEAR ASSEMBLY—7141SHAFT—7140WASHER—7149SNAP RING— 7155GEAR—7144RM-614SHIFT RAIL STOP—722INTERLOCK BALL—353075-SINTERLOCK SPRING—7234SHIFT RAIL—719LOCKWASHER33800-SNUT34817-SBEARING CUP7067RM-6O3BEARING SUPPORT—718SLEEVE—717SNAP RING—754BEARING—715SNAP RING—754Free to read online. Contents · Where is the serial number on a 9N, 2N or 8N?
