Where is the serial number on a Case W5A Loader?
On a Case W5A loader the model and serial numbers are stamped on the plate on the instrument panel (Figure 3). The engine number is stamped on a plate fastened to the lower left-hand side of the engine block (Figure 4), and the power shuttle serial number is on a plate at the top of the power shuttle housing.

Text of this manual page
Read from the scanned page by machine (OCR), so a word may be off here and there.
When ordering parts from your Authorized Case Industrial Dealer and in all contacts or correspondence relative to your Case Loader, always specify the Serial Number, Engine Number, Model of the
Loader and the Hydraulic Power Shuttle Serial Number
The Model and Serial Numbers are stamped on the plate located on the instrument panel, Figure 3. The Engine Number is stamped on a plate fastened to the lower left hand side of the engine block,
Figure 4, The Power Shuttle Serial Number is located on a plate at the top of the Power Shuttie Housing
Figure 3 Figure 4
The terms "Right Hand" and "Left Hand"! whenever used in this manual, refer to the machine as viewed when seated in the operator's seat, facing the direction of forward operation
Model Number
Engine Number
Serial Number
Hydraulic Power Shuttle Serial Number
Manuals are made for a model and a serial number range: match your serial number to the range in the manual's title. Not sure? Call 260-496-8606 and we'll check it for you.



