Where is the serial number on a Case W36 Loader?
On a Case W36 articulated loader the serial number of the basic machine is on the right-hand instrument panel. The major components carry serial numbers of their own.
| Basic machine | on the right-hand instrument panel |
|---|---|
| Engine | on the left-hand side, above the starter |
| Transmission | on the front, lower right side |
| Axle | one on the center bowl, one next to the mounting flange |
| ROPS cab | on the upper rear crossmember |
| ROPS canopy | on the upper rear crossmember |
| Starter motor | on the left-hand side |
| Air compressor | on the right-hand side |
| Loader control valve | on top of the right-hand section |

Text of this manual page
Read from the scanned page by machine (OCR), so a word may be off here and there.
When ordering parts or requesting information from your Authorized Case Dealer, always specify the model and serial number of the machine and the equipment or component in question. The serial numbers are located as follows
Basic machine - located on the right hand instrument panel
Engine - located on the left hand side above the starter
Transmission - located on the front, lower right side
Axle - one located on the center bowl, one located next to the mounting flange
ROPS Cab - located on upper rear crossmember
ROPS Canopy - located on upper rear crossmember
STARTER motor - located on left hand side
Air Compressor - located on right hand side
Loader control valve - located on top of the right hand section
Use the space below to record the model, serial or part numbers
Manuals are made for a model and a serial number range: match your serial number to the range in the manual's title. Not sure? Call 260-496-8606 and we'll check it for you.




