Free shipping to US addressesShips the next business day Call 260-496-8606
NewOldManuals.com Service, parts & operator's manuals for tractors and construction equipment
Cart (0)
Storewide sale — 20% off every manual · plus free USA shipping
Home › Serial number locations › Case W20B Loader

Where is the serial number on a Case W20B Loader?

On a Case W20B articulated loader the Product Identification Number (PIN) is on the right instrument panel. The major components carry serial numbers of their own.

Basic machine (PIN)on the right instrument panel
Engineon the left side, above the starter
Transmissionon the front, lower right side of the transmission
Axlenear the center bowl of the axle
ROPS POD cabon the upper rear crossmember in the cab
ROPS canopyon the upper front crossmember in the canopy
Starter motoron the left side of the motor
Air compressoron the right side of the compressor
Loader control valveon top of the valve
Serial number locations in the Case W20B Loader manual
Case W20B Articulated Loader Operator's Manual (Pub. 9-6002), page 24
Text of this manual page

Read from the scanned page by machine (OCR), so a word may be off here and there.

LOCATION OF PRODUCT IDENTIFICATION

NUMBER AND SERIAL NUMBERS

When you get parts or need information from your J Case dealer, you must give the model number and the Product Identification Number (PIN), also give the serial number of major components such as the engine, transmission, etc. Keep these records and the Manufacturer’s statement of origin in a safe place. If this machine is stolen, report the PIN, model number and serial numbers to your local law enforcement agency

Product Identification Number

BASIC MACHINE - the Product Identification Number (PIN) is located on the right instrument panel

Serial Numbers

ENGINE - located on the left side above the starter. TRANSMISSION - located on the front, lower right side of the transmission. AXLE - located near the center bowl of the axie. ROPS POD CAB - located on upper rear crossmember in the cab

ROPS CANOPY - located on upper front crossmember in the canopy. STARTER MOTOR - located on left side of the motor. AIR COMPRESSOR - located on right side of the compressor. LOADER CONTROL VALVE - located on top of the valve

Use the following chart to make a record of the model number, product identification number, serial numbers or part numbers of the machine or Serial Numbers

Manuals are made for a model and a serial number range: match your serial number to the range in the manual's title. Not sure? Call 260-496-8606 and we'll check it for you.

Manuals for this machine

Case W20B Articulated Loader Operator's Manual

Pub. 9-6002 · CD-ROM or USB flash drive
$45.95$36.76