Where is the serial number on a Case W20 Loader?
On a Case W20 loader the machine model and serial number plate is on the lower right side of the right-hand instrument panel. The engine plate is on the front, left side of the engine block above the starter motor; the transmission plate is on the front, lower right side of the transmission, between the suction screen cover and the drain plug; and each axle plate is on the drive shaft side of the axle, between the center bowl and the axle mounting bolts.

Text of this manual page
Read from the scanned page by machine (OCR), so a word may be off here and there.
Authorized Case Dealer, by personal contact or correspondence, always specify the model and serial number of the machine and the component or equipment in question
The machine model and serial number plate is located on the lower right side of the right-hand instrument panel
The engine model and serial number plate is located on the front, left side of the engine block above the starter motor
The transmission model and serial number plate is located on the front, lower right side of the transmission between the suction screen cover and drain plug
The axle model and serial number plate is located on the drive shaft side of the axle between the center bowl and the axle mounting
Manuals are made for a model and a serial number range: match your serial number to the range in the manual's title. Not sure? Call 260-496-8606 and we'll check it for you.




