Where is the serial number on a Case W14H Loader?
On a Case W14H loader the serial number of the basic machine is on the right-hand instrument panel. The engine, transmission, axles, ROPS and bucket carry serial numbers of their own.
| Basic machine | on the right-hand instrument panel |
|---|---|
| Engine | on the left-hand side, above the starter |
| Transmission | on the front, lower right side |
| Axle | on the drive shaft side of the axle |
| ROPS POD cab | on the upper rear crossmember |
| ROPS canopy | on the upper front crossmember |
| Bucket | on the back of the spillguard |

Text of this manual page
Read from the scanned page by machine (OCR), so a word may be off here and there.
When ordering parts or requesting information from your Authorized Case Dealer, by personal contact or correspondence, always specify the model and serial number of the machine and the equipment or component in question. The serial numbers are located as follows
Basic machine located on the right hand instrument panel
Engine located on the left hand side above the starter,
Transmission - located on the front, lower right side
Axle - located on the drive shaft side of the axle
ROPS POD Cab Located on upper rear crossmember
ROPS Canopy - located on upper front crossmember,
Use the space below to record the model, serial or part numbers,
Manuals are made for a model and a serial number range: match your serial number to the range in the manual's title. Not sure? Call 260-496-8606 and we'll check it for you.


