Where is the serial number on a Case W12 Loader?
On a Case W12 loader the model and serial numbers are stamped on the plate on the instrument panel (Figure 3). The engine number is stamped on a plate fastened to the left-hand side of the engine, on the fuel pump mounting flange (Figure 4), and the transmission serial number plate is on the left-hand side of the transmission transfer gear housing.

Text of this manual page
Read from the scanned page by machine (OCR), so a word may be off here and there.
When ordering parts from your Authorized Case Industrial Dealer in all contacts or correspondence relative to your Case Loader, always specify the Serial Number, Engine Number, Model of the Loader and the Transmission Serial Number,
The Model and Serial Number are stamped on the plate located on the instrument panel, Figure 3. The Engine Number is stamped on a plate fastened to the left hand side of the engine on the fuel pump mounting flange, Figure 4, and the Transmission Serial Number plate is located on the left hand side of the transmission transfer
ENGINE SERIAL NUMBER PLATE
Figure 3 Figure 4
NOTE: The terms Right Hand and Left Hand whenever used in this manual, refer to the machine as viewed when seated in the operator's
Model Number Engine Number
Loader Serial Number Transmission Number
Manuals are made for a model and a serial number range: match your serial number to the range in the manual's title. Not sure? Call 260-496-8606 and we'll check it for you.

