Where is the serial number on a Case 1450 Crawler Loader?
On a Case 1450 crawler the serial number of the basic crawler is directly below the equipment control levers. The engine, transmission, loader, ripper, winch and ROPS have serial numbers of their own.
| Basic crawler | directly below the equipment control levers |
|---|---|
| Engine | on the right-hand side, toward the rear |
| Transmission | on the top right rear corner of the transmission |
| Loader | on the top right side of the loader arms |
| Ripper | on the lower left connecting arm |
| Winch | on the left side of the winch |
| ROPS | in the upper left corner of the ROPS structure |

Text of this manual page
Read from the scanned page by machine (OCR), so a word may be off here and there.
When ordering parts or requesting information from your Authorized Case Dealer, by personal contact or correspondence, always specify the model and serial number of the crawler and the equipment or component in question. The serial numbers are located as follows
Basic crawler - located directly below the equipment control
Engine - located on the right hand side toward the rear
Transmission - located on the top right rear corner of the trans
Loader located on the top right side of the loader arms,
Ripper - located on the lower left connecting arm
Winch - located on the left side of the winch,
ROPS located in the upper left corner of the ROPS structure,
Use the space below to record the model, serial or part numbers
Manuals are made for a model and a serial number range: match your serial number to the range in the manual's title. Not sure? Call 260-496-8606 and we'll check it for you.




