Where is the serial number on a Case 1150C Crawler?
On a Case 1150C crawler the Product Identification Number (PIN) of the basic machine is below the manual storage box. The major components carry serial numbers of their own.
| Basic machine (PIN) | below the manual storage box |
|---|---|
| Engine | on the right side of the engine |
| Transmission | on top of the transmission |
| Torque converter | on the back of the housing |
| Loader | on the left lift arm |
| 4-in-1 bucket | on the back of the bucket |
| Dozer blade | on the back of the blade |
| Ripper | on the left side |
| Winch | on the top left side |
| ROPS canopy | on the upper, front crossmember |
| Loader bucket | part number on the back of the bucket |

Text of this manual page
Read from the scanned page by machine (OCR), so a word may be off here and there.
LOCATION OF PRODUCT IDENTIFICATION
NUMBER AND SERIAL NUMBERS
When you get parts or need information from your Case dealer, you must give the model number and the Product Identification Number (PIN). Also give the serial number of major components such as the engine, transmission, etc
Product Identification Number
BASIC MACHINE - the Product Identification Number (PIN) is below the manual storage box
Serial Numbers
ENGINE - on the right side of the engine. TRANSMISSION - on top of the transmission. TORQUE CONVERTER - on the back of the housing
LOADER - on the left lift arm. 4-IN-1 BUCKET - on the back of the bucket
DOZER BLADE - on the back of the blade. RIPPER - on the left side. WINCH - on the top left side
ROPS CANOPY - on the upper, front crossmember
Part Numbers
LOADER BUCKET - part number on the back of the bucket
Use the following chart to make a record of the model number, product identification number, serial numbers or part numbers of the machine or Serial Numbers
Manuals are made for a model and a serial number range: match your serial number to the range in the manual's title. Not sure? Call 260-496-8606 and we'll check it for you.




